PROLINK Huricane 9200/S Manuel D’Utilisation
Chapter
18
. Modifying Port Settings
183
LAN HTTP server rather than to the HTTP server on the
Hurricane 9200/S.
Thereafter, when your ISP wants to log on to your
Thereafter, when your ISP wants to log on to your
Configuration Manager, they would type your IP address
in their browser, followed by a colon and the non-standard
port number, as shown in this example:
http://10.0.1.16:61000
Your ISP may also have special circumstances that require
changing the port numbers; contact them before making any
changes here.
Follow these steps to modify port settings:
1. Log into Configuration Manager, click the Admin tab, and
Follow these steps to modify port settings:
1. Log into Configuration Manager, click the Admin tab, and
then click
$!
in the task bar.
The Port Settings page is shown in Figure 86.
Figure 86. Port Settings Page
2. Type the new port number(s) in the appropriate text box(es)
and click
.
The default port numbers are shown in Figure 86. You can
enter non-standard port numbers in the range 61000-62000.
3. Click
in the task bar, and click
to save your changes to permanent memory.
4. On the Commit & Reboot page, click
.
Note that the new settings will not be effective until you reboot the
system.