Polycom Water System DOC2091A Manuel D’Utilisation

Appendix

Global Management System User’s Guide

Make sure that a LAN cable connected from the local area network is connected to the orange 
connector on the back of your ViewStation. See the ViewStation QuickStart booklet for details.

1.  Turn on the ViewStation.

2.  Press the right arrow button on the remote control to select the System Info icon. Then  

press the SELECT button to select it.

3  Press the right arrow button on the remote to go to the screens: 

  Setup > LAN/SNMP > LAN/Intranet > 

  If your LAN uses DHCP, press the up arrow on the remote to go to the DHCP field. Use  

the arrow button to set the DHCP setting to Client. This enables the ViewStation to obtain  
an IP address from a server on your network.

  If your LAN does not use DHCP, set DHCP to off in the LAN/Intranet screen and manually 

enter the IP address, subnet mask and gateway address provided by your system 
administrator.

4.  Restart your ViewStation by turning it off then on again. Go to the System Information 

screen. You should see your system’s IP address. If the IP address displays “...waiting...”, 
the ViewStation did not get an address from a server on your LAN. Check the LAN 
connection and try again. The green light on the connector should be illuminated and the 
yellow light should be blinking.

  This ViewStation can now be added to the database.