Polycom Water System DOC2091A Manuel D’Utilisation

Page de 220
116
Appendix
Appendix
Global Management System User’s Guide
Modem Installation for SoundStation VTX 1000 Device Support
The  Global  Management  System  (GMS)  version  6.10  and  above,  provides  Device  Support 
for  SoundStation  VTX  1000  conference  phones.    Unlike  other  devices  supported  under  GMS, 
SoundStation VTX 1000 is an analog conference phone that requires that a modem to be installed 
to the GMS Server for device support.
The  recommended  modem  for  SoundStation  VTX  1000  Device  Support  under  GMS  is  the 
RapidPort/4 Dual Unit PN:  301-1012-08.  The RapidPort/4 Dual Unit provides 8 modem ports 
for  GMS  to  upload  software  to  8  SoundStation  VTX  1000s  simultaneously,  minimizing  upload 
times  for  multi-unit  upgrades.    Software  uploads  to  SoundStation  VTX  1000,  depending  on 
modem connection parameters, averages 15 – 20 minutes per unit so the Dual Port modem is 
recommended for large SoundStation VTX 1000 deployments.  For smaller deployments, the 4-
port version is fine alternative, PN:  301-1012-04
RapidPort/4  modems  are  not  sold  by  Polycom,  but  are  available  worldwide  through  a  broad 
reseller network.  Please visit Digi International’s web site for purchase information and a reseller 
in your area.
http://www.digi.com/products/usb/rapidport4.jsp
Modem Installation:
Install the RapidPort/4 modem on the GMS Server in accordance with the installation 
instructions provided with the unit.  Digi updates RapidPort/4 modem drivers frequently, so it 
is highly recommended that the latest modem drivers be installed after the initial installation 
process for maximum performance, from the following link:
http://www.ionetworks.com/support/epdrivers.jsp#E2K
Using Other Modems:
Using  modems  other  than  the  RapidPort/4  for  SoundStation  VTX  1000  Device  Support  is  not 
recommended  and  Polycom  does  not  support  such  modems  for  the  GMS/VTX  application.  
However, other modems may perform the same function adequately. 
  
NOTE
If  a  modem  other  than  RapidPort/4  is  used,  be  sure  to  configure  “MODEM  CALL  TONE 
WAIT” to “ON” in the SoundStation VTX 1000 Admin Setup section of the user interface of 
SoundStation VTX 1000 (not GMS).  This VTX configuration change must be made for all 
VTX units supported by non-RapidPort/4 modems; please see the SoundStation VTX 1000 
Administrator’s Guide for more details.