Troy-Bilt 70 Manuel D’Utilisation

5.  a. Slide hose adapter of hose assembly into the 

base adapter located on the left front of the Yard 
Vacuum. See Figure 3-5.

  b. Pull spring loaded pin out on the base and align pin 

with the first hole (closest to the end of the tube) in 
the hose adapter. 

  c.  Release the pin to lock the hose in place.
6.  a. Snap the hose handle first into the upper hose 

handle bracket and then into the lower hose handle 
bracket. See Figure 3-6.

  b. Lay hose tubing on hanger bracket next to chipper 

chute. 

NOTE: The bag/chute 
switch button attached 
to the mounting 
bracket must be fully 
depressed by the tip of 
front tab on bag handle 
when securing the bag 
or engine will not start.

A

B

A

B

Align pin 

with this 

hole.