Panasonic Arbitrator 360 Mode D’Emploi

E-33

If the unit seems to be malfunctioning, try checking the following points. If the problem persists,
contact the place of purchase.

The POWER LED does not light after the
[POWER] button is pressed.

• Is the battery pack drained?
• Is the AC adapter connected correctly?

Copying does not start after a P2 card is inserted
and the [START] button is pressed.

• Is there enough space for copying on the internal HDD?
• Is an error displayed indicating that internal HDD

temperature is over or under the prescribed level?

• Is an error indicating insufficient remaining charge of

the battery pack being displayed?

The [REMAIN] LEDs do not light after the [

]

button is pressed.

• Is the POWER LED lit (green)?

The [REMAIN] LEDs do not light after the [HDD
CAP] button is pressed.

• Is the POWER LED lit (green)? 

The unit’s internal partition names are not displayed
in Explorer (Windows) or the Finder (Macintosh)
when the unit is connected to a computer with the
USB 2.0 cable.

• Is the unit processing copy or format operations?
• Does the computer support USB 2.0 connections?
• Does the computer’s OS meet the following conditions?

- Windows Vista Business or higher
- Windows XP Professional SP2 or later
- Windows 2000 SP4 or later
- Macintosh OS X (10.4)

• Is the unit correctly connected to the computer?
• Is the network drive assigned a letter immediately

after the letters of the computer's hard drive or CD-
ROM drive?

P2 cards cannot be formatted.

• Is the write-protect switch set to PROTECT?
• Is the P2 card inserted correctly?

The POWER LED merely flashes after the
[POWER] button is pushed.

• Are you attempting to turn the unit ON in

temperatures below 5 °C (41 °F)?