Panasonic Arbitrator 360 Mode D’Emploi

118

119

Playback with the remote control panel is not available 

at present. Upgrading is scheduled for the future. 

For playback, it is recommended to use the Front-End 

application or Back-End Client application.

The Status Display shows messages about the operating status of the SDHC Memory Card and the recorder. Take action as 

appropriate for each status.

CARD FULL

The following conditions may have occurred. 

• There is no space left on the SDHC Memory Card. 

•  Files contained in one of the SDHC Memory Cards inserted in the SDHC Memory Card slots 1, , 

3, and 4 exceed 5,000 files.

Replace the SDHC Memory Card with an SDHC Memory Card with free capacity, or free up 

space in the SDHC Memory Card for new data. 

CARD PROTECT

The write-protect switch of the SDHC Memory Card is set to “LOCK”. Move the switch to enable 

writing.

VUP CARD

Writing is not possible on an SDHC Memory Card intended for version upgrade. Replace the card 

with one that is not intended for version upgrade.

UNFORMATTED

The SDHC Memory Card is not formatted. Replace it with a formatted card.

NO CARD

No SDHC Memory Card is inserted. Insert an SDHC Memory Card.

READ ERROR

An error occurred while reading. File playback is not possible, or the associated meta information 

cannot be displayed correctly.

UNSUPPORTED

Archive screen: The file is unsupported. Playback is not available.

Live screen: The memory card is unsupported. For the memory card supported, refer to “Usable 

memory cards” in Operating Instructions Section 1: Before Use.

PLAY ERROR

A decoder malfunction occurred. Playback is not available. Reboot the recorder.