Panasonic Arbitrator 360 Mode D’Emploi

68

69

RETURN

MENU

CONTROL PANEL

ON/

OFF

Cursor button

MENU button

Use the following function to see the status of the recorder 

or trigger signal (GPI1-16) status when a played back file 

was recorded.

The Menu appears.

2.  Press the [ , ] buttons to select [Setup/Info] 

Confirm

Select

3.   Press the [ , ] buttons to select [Overlay 

Select

4.   Press the [ , ] buttons to select “AUTO”, 

select

AUTO : The simple overlay OSD appears for  to 5 seconds 

when any of the following items have been changed 

               •  Playback filename

               •  Mode indication

               • Playback speed and status indication

SIMPLE: The Simple overlay OSD appears. 

DETAILS: The Detailed overlay OSD appears. 

OFF: Overlay OSD closes.

An administrator can set the Overlay OSD (Init Overlay 

OSD) selected at power-on.

See the next page for how to read the overlay OSD.

When “AUTO” is selected and the [BOOK MARK] button 

is pressed or the bookmark position is reached, the simple 

overlay OSD does not appear but the bookmark icon   

appears for 1 to  seconds. 

When “AUTO” is selected and the trigger position is reached, 

the simple overlay OSD does not appear but the trigger icon 

 appears for 1 to  seconds.

When a picture recorded with Main OSD or Sub OSD 

embedded on the Embedded OSD screen in Administrator 

setup set to OFF is played, Trigger, Time, and Source@

Area that are set to ON on the Embedded OSD screen are 

displayed. Select [Position (Press ENTER)] on the Setup/Info 

screen then press [

] button. Then the display position will 

move up and down.
Note:

The OSD position of the picture recorded with Main OSD or 

Sub OSD on the Embedded OSD screen in Administrator 

setup set to ON cannot be changed.

•

•

•

•

Playback with the remote control panel is not available at 

present. Upgrading is scheduled for the future. 

For playback, it is recommended to use the Front-End 

application or Back-End Client application.