Panasonic Arbitrator 360 Mode D’Emploi

80

81

Use this function to set the interval after which the Remote 

Control Panel and the recorder will shut down after the 

ignition switch has been set to the LOCK (OFF) position. 

Setting :  0 min, 10 min, 20 min, 30 min, 60 min, 90 min, 

120 min, 180 min, AUTO

*

1

Select a Preset number when the power is turned on. Only 

the preset numbers set on the Video Allocation screen are 

selectable. For example, if only Preset 1 and Preset 2 have 

been set, Preset 3 cannot be selected.

Setting: PRESET 1, PRESET 2, PRESET 3, LAST 

*

2

Select a signal output from the [VIDEO OUT 1] connector on 

the recorder when the power is turned on. Only the cameras 

set to ON on the Video Allocation screen are selectable. 

For example, if CAM3 has been set to OFF, CAM3 is not 

selectable.

Setting: CAM1, CAM3, VIDEO OUT2, LAST 

*

2

Use this function to set recording to start when the recorder 

is turned on.

Setting: OFF, ON

Use this function to continue recording new video while 

deleting the oldest recorded files if no space is available on 

an SDHC Memory Card.

Setting: OFF, ON

If Upload Mode on the Management Mode screen is set to 
AUTO, the setting is fixed to OFF, and loop recording will 
be disabled.
If Loop Rec is set to ON, the Upload Mode on the 
Management Mode screen cannot be set, and uploading 
is disabled.

Use this function to record one video frame per second

*

3

.

Setting:OFF, ON

*

Use this function to set recording continue time for normal 

recording when a trigger is entered or when the [REC] button 

is pressed.

Setting:  CONTINUE, 1 min, 2min, 5min, 10 min, 15 min, 

20 min, 30 min, 60 min, 90 min

•

•

*

1  

Power is turned off immediately. Note, however, that power is not 

turned off while data is exported to a USB memory device, but is 

turned off after completion of data export.
When recorder operation is controller by a Front-End or 

Power is turned off when control from a Front-End or Back-

End application is released, uploading, streaming, administrator 

setup, or updating is finished on the Back-End application, or the 

SDHC Memory Card slot cover is opened.

If uploading or exporting continues for more than three hours, it 

will be interrupted to save battery charge, and the power will be 

shut off.

*

2  Applies the setting in effect when power was last turned off. 

Unless power is turned off properly, the operating state may not 

be saved correctly.

*

3  Normal recording records 10 or 30 video and audio frames per 

second.

*

4  Intermittent recording does not stop with the time set on Rec 

Continue Time.