Texas Memory Systems RamSan-325/325c Manuel D’Utilisation

 

 

 

RamSan-325/325c User’s Manual 

 

- 72 - 

Linking Fibre Channel Controllers 

•  From the Telnet Main Menu, select “LUN Setup” 

•  Select “Link/unlink fibre channel controller(s) to/from 

LUN(s)” 

 

 

The Link LUNs screen displays the currently selected controller and 

port above the menu. Figure 6-8: Link LUNs Screen displays the 
selected controller as 2-A, which is Controller 2 Port A. 
 

•  To change the selected controller select “Select different 

controller”. This displays a list of controllers. Select one and 

press [ENTER]. 

•  To change the port, select “Select different channel on 

controller”. This displays a list of channels. Select one and 
press [ENTER]. 

 
In addition, the “Link/Unlink LUN(s)” screen indicates the number 
of LUNs currently linked to the selected controller. 

 
•  To link a LUN to the selected controller, select “Link LUN(s) to 

selected controller”.  

•  From the sub-menu that lists all LUN numbers not already 

linked to another FC port, select a LUN number and press 
[ENTER].  

 
If all LUNs are linked to ports already, then the system displays an 
error message.  

 
•  Select “Exit to the LUN configuration menu” 

•  To save the changes once you have completed all LUN 

configuration, select “Save changes and exit” 

 
To ensure that your changes were successful, see Section 6.3  - 

Viewing LUN Status / LUN Map.