Technics ST-C700 Mode D’Emploi

Page de 36
11
HOME menu and basic operations
Major functions of this unit can be operated from the HOME 
menu.
Preparation
≥ Prepare the music that you want to play back.
≥ Turn on the connected device (amplifier, etc.) and lower its 
volume.
1
Raise the power switch lever of this unit to 
the [Í/I] position.
2
Press [NWP].
3
Press [HOME].
4
Press [3, 4] to select an item and then 
press [OK].
≥ If there are any other items, repeat this step.
5
Start play.
∫ To display HOME menu
Press [HOME].
Adjust the volume of the connected device (amplifier, etc.).
The brightness of this unit’s display and the basic control 
switches can be changed.
Press [DIMMER] repeatedly.
≥ When the display is turned off, it will light up only when you 
operate this unit.
Before the display turns off again, “Display Off” will be displayed 
for a few seconds.
You can turn the beep sound on/off.
≥ The factory default is “On”.
1
Press [NWP].
2
Press [HOME].
3
Press [3, 4] repeatedly to select “SETUP” 
and then press [OK].
4
Press [3, 4] repeatedly to select “Beep” 
and then press [OK].
5
Press [3, 4] to select “On”/“Off” and then 
press [OK].
If you install the dedicated app “Technics Music App” (free of 
charge) on your tablet/smartphone, you can control this unit 
and the SU-C700 using a wide variety of functions.
For details, visit:
www.technics.com/support/
LAN
Connects this unit to a network and 
plays back music over it. (> 13)
USB
Plays back music stored on a USB 
device or an iPhone/iPad/iPod. 
(> 14, 15, 16)
PC
Plays back music stored on a PC, 
etc. (> 17)
Bluetooth
Connects this unit to a Bluetooth
®
 
device and plays back music stored 
on it. (> 18, 19)
SETUP
(> 11, 12, 20, 21, 22, 23)
ラヰヮユ
ヶヴャ
ヒバブ
ロモワ
Adjusting the volume
Display brightness
Operation sound setting
Operations using the 
dedicated app “Technics 
Music App”
ST-C700-SQT0495_PP_mst.book  11 ページ  2015年1月7日 水曜日 午前10時36分