Technics ST-C700 Mode D’Emploi
9
Getting started
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Do not connect the AC power supply cord until all other connections are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
≥ Do not connect the AC power supply cord until all other connections are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
≥ You can output digital audio signals from this unit and play back music.
≥ You can automatically link this unit with the SU-C700 and operate them easily with the remote control. (> 23)
≥ You can automatically link this unit with the SU-C700 and operate them easily with the remote control. (> 23)
≥ Do not use any other system connection cables or coaxial digital cables except the supplied one.
≥ Connect the system connection cable to the system terminal [CONTROL1] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input terminal [COAX1 IN] of the SU-C700.
≥ Connect the system connection cable to the system terminal [CONTROL1] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input terminal [COAX1 IN] of the SU-C700.
You can output analog or digital audio signals from this unit and play back music files.
System control connection to an SU-C700
This unit
(rear)
SU-C700
Coaxial digital cable
(supplied)
System connection cable
(supplied)
(supplied)
Connecting to an amplifier and a D/A converter
e.g.,
This unit
(rear)
(rear)
Amplifier
Optical digital audio cable
(not supplied)
(not supplied)
D/A converter
Audio cable
(not supplied)
ST-C700-SQT0495_PP_mst.book 9 ページ ２０１５年１月７日 水曜日 午前１０時３６分