TANDBERG 7000 MXP Manuel D’Utilisation

TANDBERG 7000 MXP 

202 

               
 

 
Example: 
 
Max Channels may be used for PRIs that are provisioned for a lower number of channels.  
 
High Channel, Low Channel and Search may be used for PRIs provisioned with specific 
requirements for B-channel usage.  
 

 
 
In the example above, the system will start searching for available B-channels at channel 20, 
since Search is set to High and High Channel is set to 20. The system will not search for 
channels below 10, since Low Channel is set to 10. Furthermore if the user tries to make an 8 
channel call, the call will be established with 6 channels, since Max Channels is set to 6. 
  

T1 Cable Length 1 specifies the distance to the CSU connected to the 
E1/T1 port 1 on codec 1.  
 

E1-CRC-4 is used for most E1-PRI configurations. You can turn it off if not 
supported by your E1 network equipment. 
For further information see 

Appendix 8

: Connecting the system to PRI/T1.