TANDBERG 7000 MXP Manuel D’Utilisation

TANDBERG 7000 MXP 

204 

 

 

 
Call Control 
 

When Auto is selected, the system will automatically initiate a connection as 
soon as it detects that the far end tries to make a call. This mode is also 
commonly known as "data triggered" mode, because the existence of certain 
data patterns on the line triggers a connection. 
 

When manual is selected, the user has to explicitly issue a dial command to 
make the system connect to the far end system. Receiving an incoming call is 
not possible. 
 

 
Network Interface  
 
Indicates if the network is of type E1 (30 channels) or T1 (24 channels). E1 will be default for PAL 
versions, T1 default for NTSC versions. 
 
Max Channels  
 
Indicates the maximum number of channels the codec is allowed to use on the E1/T1 interface. 
When E1 is selected, maximum is 30 channels. When T1 is selected, maximum is 24 channels. 
 
Start Channel  
 
Indicates the first E1/T1 channel the codec is allowed to use. This setting might be used if the 
E1/T1 line is shared with other equipment. 
 
T1 Line Coding 
 
Indicates how the signals on the line should be coded. If parts of the line between the systems 
use restricted coding, this should be selected.  
 

 
Note that all settings must be identical on both sides of the Leased E1/T1 connection.  
 

 
Line Settings  
 
This is the same menu as for ISDN-PRI. Please refer to 

ISDN-PRI Settings

.