Omega RD200 Manuel D’Utilisation
-97-
14. PRINTING FORMAT
14.3 Programming Zone Printing
3
Programming Flow Chart (RD200)
<Example> Programming CH 1 and CH 3 to zone No.1, and
CH 2 and CH 4 to zone No. 2
CH 2 and CH 4 to zone No. 2
+
(3 time)
→
→
+
Press to display parameters.
The parameters are displayed
sequentially each time is
pressed.
Store the parameters into memory.
(Programming change mark is
printed.)
“+” mark is printed at the border of the
area.
*Fill unused digits with spaces
Store the parameters into memory.
(Programming change mark is
printed.)
“+” mark is printed at the border of the
area.
*Fill unused digits with spaces
.
Cursor
Standard
Ref. 1
Zone
(1)
(2)
(3)
(4)
(5)
(6)
Cursor
DISP
SHIFT
DISP
SET
END
ºF
ENTRY
ENTRY
∗
∗
ENTRY
SHIFT
SET
END
ENTRY
ENTRY
Operation screen
[Checking printing format]
[To be ready for programming]
[Selecting zone printing]
[Programming channel of 1st area]
[To display step (4)]
Stored
Press any key other than
and program again. When it is normal,
the next screen appears.
and program again. When it is normal,
the next screen appears.
SHIFT
Selection and
overlapping of channels
overlapping of channels
Remarks 3
The channel not selected in any
zone is skipped. Also, if the selection
of channel is overlapped or the
skipped channel is selected, error
display appears.
zone is skipped. Also, if the selection
of channel is overlapped or the
skipped channel is selected, error
display appears.
Checking parameters
Reference 1
Storing
Reference 2
Border mark
Reference 3
[Programming channel of 2nd area]
Remarks 1
Remarks 1
Remarks 2
Ref. 2
Remedial measure
to error display
to error display
Various
keys
Various
keys
Remarks 1
For storing parameters into memory,
return the screen to Step (4).
return the screen to Step (4).
Return to the screen of Step (4)
Remarks 2