Omega RD200 Manuel D’Utilisation
-69-
11. OTHER PROGRAMMING
11.8 Engineering Units
Engineering units up to 5 digits can be assigned for digital data printing and scale printing.
Press and simultaneously to display [Engineering unit] programming screen.
(Digital data printing)
(Scale printing)
(List printing)
1
In case no engineering unit is programmed;
An engineering unit is decided by the range number programmed in the [Range/Printing range] programming.
Voltage range
Temperature range
mV
(01 to 05)
V
(06 to 10)
°C
(Nos. other than ones
shown on the right)
K
(47, 80)
2
Programming Mode
*1: Engineering unit character
The character at the digit where the digit number is pointed by the cursor is displayed.
*2: Digit No. of engineering unit character
A digit No. 1 to 5 is displayed by pressing .
<To decrease the digit No.>
Press and simultaneously to clear the digit No. and press for reprogramming a
new digit No.
Press and simultaneously to clear the digit No. and press for reprogramming a
new digit No.
A programmed engineering unit is deleted and
the engineering unit determined by the range
No. is displayed
the engineering unit determined by the range
No. is displayed
If the scale is cleared in a channel; the
engineering unit of this channel is deleted, and it
becomes the engineering unit determined by
range No.
engineering unit of this channel is deleted, and it
becomes the engineering unit determined by
range No.
*1
単位印字の例
Examples of engineering unit printing
If clear is stored at scale programming;
If the range No. is changed;
SHIFT
3
UNIT
°F
°F
°F
SHIFT
0
CLEAR
Engin
eeri
n
g
un
it c
h
a
ra
ct
e
r
Digit No. of engineering unit character *2
(Up to 5 digits.)
(Fixed)
(Numeric numbers (1 to 5) appear for the digit not programmed by pressing .)
Ch
an
ne
l
Cur
so
r