Quadra-Fire CASTILE-CE-MBK 7068-112 Manuel D’Utilisation

Page 30

August 19, 2011

R

7068-112

Flex Hose

Hose Clamp

Collar Assembly

Trim Ring

Termination

Cap Assembly

Hose Clamp

Air Intake Channel

(Discard)

Parts Included in Kit:  1  piece  of  51mm  x  914.4mm  flex

hose, 2 hose clamps, 1 air intake channel1 collar assembly,

1 termination cap assembly, 1 trim ring, 12 screws. (Discard

air channel it is not need for this appliance).

1.  Measure distance from floor to air vent opening in stove

and mark location on wall.

Use saw to cut opening in wall. Cut a 64 to 76mm open-

ing on inside wall and a 76 to 89mm opening on outside

of house.

2.  Remove cover plate and then install the collar assembly.
3.  Use hose clamp to secure flex pipe to collar assembly.
4.  Slide trim ring over flex pipe and run pipe through wall.
5.  Attach hose to outside termination cap with second hose

clamp.

6.  Secure termination cap to outside surface.
7.  Secure trim ring to interior wall.

Tools Needed: Phillips head screwdriver; wire cutters; hole

saw or jig saw.

Never draw outside combustion air from:

•  Wall, floor or ceiling cavity

•  Enclosed space such as an attic or garage

Termination Cap

Hose Clamp

Trim Ring

Flex Hose

Collar 

Assembly