Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation

 

MULTI CONTROL 

 

steer your boat so tha

, which 

means you are on the desired track. 
 

The sub-function (Pilot) is intended to be used together with the 
optional analogue inst

0-2) to 

assist the helmsman to 
 
The powerful combin

functions. 
 
Compass steering: (M
1. Compass steering, using the 1 memory.  
2. Headers and lifters, using the 2 memories and trim button. (See 
9.3) 
Wind steering: (AWA) 
3. Close hauled indicato
4. Down wind indicator,
 
Waypoint steering: 
5. Bearing To waypoint 
6. Course To Steer (CT
 
When a steer reference
selected the analogue s
instrument is immediate
It starts to indicate the d
between desired and actual heading 
or angle. The logic is to keep the 
steer pilot instrument needle straight 
up  pointing at zero (0) to stay on the 
set heading.  
 
From analogue steer pilot instrument version 2.0, (MEM) and 
(BTW) is functioning with COG (if navigator connected) even if a 
compass is not installed . The analogue read out will start at 
speed above 4KTS and stop below 2 KTS.   
 
If you do not have the analogue steer pilot instrument, you can still 
use the function, if you display the selected steer reference 
heading (STR) in the sub-function and compare it with the actual 
compass heading in the main-function.  
A NX2 autopilot can not be activated from the steer reference 
function. But when the NX2 autopilot has been activated in 
compass or wind mode it is possible to alter the autopilots 
heading from the (MEM) and (AWA) functions. 
 

t the display readout is 0.00 NM

rument steer pilot (Art. No. 2055

keep the desired heading.  

EM) 

r, ex. 35° 

 ex. 175° 

(BTW) 

S), including set and drift 

 has been 

teer pilot 
ly activated. 

ifference 

 

28