Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation
MULTI CONTROL
The last used steer ref
in mem
and automatically activa
lable Server version
2.6)
8.3.1
Overview
Steer reference functio
t on
(MEM)=Compass headi
stored in 1 or 2
memories (TAC
(BTW)=Bearing to wayp
(CTS)=Course to steer
waypoint, correc
for drift and curr
(AWA)=Apparent wind a
(OFF)=Steer pilot off
When any steer refere
display will be copied a
in your Nexus Network.
8.3.2
Steer ref
This function requires th
The function is semi
compass heading is copied
value manually.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected
steer reference function flashes.
To select steer reference (MEM), press PLUS.
To activate the function, press SET. MEM is shown on the display.
The sub-function (STR) automatically displays the stored (MEM)
value.
The text (MEM) and (STR) is alternating.
If you want to change the steer reference value, press SET.
The first digit flashes.
To set the new value press MINUS, PLUS and PAGE as required.
To store the value, press SET.
Note: Steer reference heading value (MEM) can also be selected
directly from the optional trim button, without first selecting (MEM)
The function is semi
compass heading is copied
value manually.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected
steer reference function flashes.
To select steer reference (MEM), press PLUS.
To activate the function, press SET. MEM is shown on the display.
The sub-function (STR) automatically displays the stored (MEM)
value.
The text (MEM) and (STR) is alternating.
If you want to change the steer reference value, press SET.
The first digit flashes.
To set the new value press MINUS, PLUS and PAGE as required.
To store the value, press SET.
Note: Steer reference heading value (MEM) can also be selected
directly from the optional trim button, without first selecting (MEM)
erence function will be stored
ory
ted at power on. (Avai
of steer reference (Pilot
n
Reference
Tex
type
display
ng
Manual
)
oint
Automatic
to
Automatic
ted
ent
ngle
Manual
nce function is activated, the text on the
nd shown on all Multi Control instruments
erence (MEM)
e NX2 or NMEA compass transducer.
automatic, i.e. when activated, present
to memory. You can later change the
29