Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation

 

MULTI CONTROL 

 

To set a wind speed al
true wind speed is higher than the set level. To switch of the 
alarm, set C67 to 00. To silen

a

. 

 
The alarm level is set from 1 to 50 m/s. 
 
To set the alarm level,
required. To store the s
 
Note! The Alarm level is
 
If the set alarm level is  ach

t

ed, the wind speed must drop 

below 50% of the set ala
 

When calibration code C70 is selected, the LCD arrow
functions will be display

To return to the normal mode
 

(On) = Sound when pus
 

Damping of speed and course over ground (SOG/COG), affecting the complete 
Nexus Network and NMEA output. 
d0 = no damping. d1 = 2 sec, d2 = 5 sec, d3 = 10 sec, d4 = 20 sec, d5 = 40 sec, d6 = 
1.20 min, d7 = 2.40 min, d8 = 5 min and d9 = 10 min. 
 

(OFF) = NX2 log transducer. (On) = NMEA log transducer. 
If you want to use a NMEA transducer (connected to the NMEA input, you have to set 
C73 to On. The Server will then transmit this information on the Nexus Network to all 
connected instruments. 
After you have changed this setting, you have to restart the system 
 

(OFF) = NX2 depth transducer. (On) = NMEA depth transducer. 
If you want to use a NMEA transducer (connected to the NMEA input, you have to 
set C74 to On. The Server will then transmit this information on the Nexus Network 
to all connected instruments. 
After you have changed this setting, you have to restart the system 
 

arm level. The buzzer will sound when the 

ce an al rm, press any key

 press SET. To select level, press PAGE,  PLUS  or MINUS as 

elected value, press SET. 

 always set in m/s regardless of unit used for displaying! 

re

ed and  he alarm Is silenc

vel to be activated again. 

rm le

s for all 

ed 

, press SET. 

h buttons are pressed. (OFF) = no sound.  

 

47