Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation

 

MULTI CONTROL 

 

(OFF) = NX2 compass 
If you want to use a NM

EA input, you have to 

set C75 to On. The Server will then transmit this information on the Nexus Network 
to all connected instrum
After you have changed
 

(OFF) = NX2 wind trans
If you want to use a NM
set C76 to On. The Ser
to all connected instrum
After you have changed
 

Contains 16 NMEA slot
 

Damping for NMEA OU
Only compass heading (HT

speed through water 

(BSP) can be damped w th th
 
d0 = 0.5 sec, d2 =1 sec
d6 = 20 sec, d7 = .40 se
 

Select type of heading transducer, compass or navigator (COG), 
to be displayed as main-function under NAVIGATE. 
When COG is available (NX2 or NMEA), and no compass 
transducer is connected, you can set C94 to (ON), COG will also 
be used to compute TWD (true wind direction) 
 

Select speed transducer to be displayed as main-function under SPEED.  
(OFF) = Boat speed through the water from log transducer. 
(ON) = Speed Over Ground (SOG) from navigator. This will not affect wind calculation, 
see 12.6.12 
 

Select speed transducer (REF BSP) or Speed Over Ground (REF SOG) to be used for 
computing true wind speed and angle, VMG, True Wind Direction and trip log, total log 
and distance.  
(REF BSP) = Boat speed through the water from log transducer. 
(REF SOG) = Speed Over Ground (SOG) from navigator. 
 

transducer. (On) = NMEA compass transducer. 

EA transducer (connected to the NM

ents. 
 this setting, you have to restart the system 

ducer. (On) = NMEA wind transducer. 

EA transducer (connected to the NMEA input, you have to 

ver will then transmit this information on the Nexus Network 

ents. 
 this setting, you have to restart the system 

s. (See 12.7.2) 

T from Server. 

/HM) and boat 

i

is code. 

, d3 = 2.5 sec, d4 = 5 sec, d5 =  10 sec,  

c, d8 = 80 sec and d9 = 160 sec. 

 

48