Nexus 21 Marine NX2000 Manuel D’Utilisation

 

VHF NX2000 

English 

 

11 

 

 

The NX2000 is switched on by pressing the (ON) key once. If a GPS receiver has been 
connected to the NX2000, the MAIN screen will be as below: 

Press the (F) key on the front panel once to enter the Function Selection mode. The 
FUNCTION SELECTION screen will be displayed as below: 

Press the ▲ or ▼ key to move the cursor to the required function (DUAL WATCH, 
FULL SCAN, MEMORY SCAN, TAG CHANNEL), then press (F)  key to confirm. The 
relevant screen will be displayed. Press (F) key again or press (16) key to restore 
normal operation, and press (CLR) key to change to the main screen. 
 

Dual Watch enables the Radio to scan between the selected channel and priority 
channel (normally CH16). In Dual Watch mode, the DW indicator will appear on the 
bottom line of the LCD. 

Note that the Radio will not transmit, nor will alternative channels be able to be selected 
while in Dual Watch mode. To restore normal operation press (F) key again or press 
channel (16) key.