Lucent Technologies Window SLV 9124 Manuel D’Utilisation

Configuration

9124-A2-LB20-00

March 2000

Using the system’s standard Routing Information Protocol (RIP) feature, routing
information is passed to the router over the management PVC, so the router can
learn routes to FrameSaver SLV devices. Node IP information should be set up
(see 

"

1. Configure the router to receive RIP.

For example, if using a Cisco router, configure 

, 

,

, 

, then 

.

2. Create a Standard DLCI for the user data port.

→

→

3. Create a Management PVC using the user data port DLCI just configured.

→

→

4. Set Primary Link RIP to Standard_Out, and Save the configuration.

When management needs to be set up between a service provider’s customer
and its network operations center (NOC), a non-multiplexed DLCI must be
configured to carry management data between the customer’s central site and
the NOC console. This requires that a frame relay discovered DLCI needs to be
modified. This is because all auto-configured network DLCIs are configured as
multiplexed DLCIs.

"

To set up NOC management:

1. Select DLCI Records on the network interface.

→

→

2. Select Modify. The 

 prompt

appears.

3. Select the DLCI that will be used by pressing the spacebar until the correct

DLCI number appears, then select it.

4. Change the DLCI Type from Multiplexed to Standard.

The

 DLCI in connections. Update DLCI usage as follows:

prompt appears.