Linksys BUSINESS SPA932 Manuel D’Utilisation

Linksys SPA9x2 Phone Administration Guide

66

A RingScript is a mini-script that describes a ring tone. The syntax follows: 

•

n=ring-tone-name;w=waveform-id-or-path;c=cadence-id;b=break-time;t=total-time 

ring-tone-name is a name to identify this ring tone specification. This name will appear 
on the Ring Tone menu of the phone. The same name can be used in a SIP Alert-Info 
header in an inbound INVITE request to tell the phone to play the corresponding ring 
tone specification. Because of this, the name should contain characters allowed in a URL 
only. 

Waveform-id is the index of the desired waveform to use in this ring tone specification. 
There are 4 built-in waveforms: 

1 = A classic phone with mechanical bell 

2 = Typical phone ring 

3 = A classic ring tone 

4 = A wide-band frequency sweep signal 

This field can also be a network path (url) to download a ring tone data file from a server 
on-the-fly. In this case, the syntax of the field is 

w=[tftp://]hostname[:port]/path. 

cadence-id is the index of the desired cadence to play the given waveform. 8 cadences 
(1–8) as defined in <Cadence 1> through <Cadence 8>. Cadence-id can be 0 If w=3,4, or 
an url. Setting c=0 implies the on-time is the natural length of the ring tone file. 

  • Example 3: SIT Tone 

  • 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/

3,0/4/0) 

  • Number of Frequencies = 3 

  • Frequency 1 = 985 Hz at –16 dBm 

  • Frequency 2 = 1428 Hz at –16 dBm 

  • Frequency 3 = 1777 Hz at –16 dBm 

  • Number of Cadence Sections = 1 

  • Cadence Section 1: Section Length = 20s 

  • Number of Segments = 4 

  • Segment 1: On=0.38s, Off=0s, with Frequency 1 

  • Segment 2: On=0.38s, Off=0s, with Frequency 2 

  • Segment 3: On=0.38s, Off=0s, with Frequency 3 

  • Segment 4: On=0s, Off=4s, with no frequency components 

  • Total Tone Length = 20s