iHome iHC5 Manuel D’Utilisation

Using the iHC5

Connect iHC5 to Power Source

a) Plug the AC adaptor cable into the AC adaptor jack

and the other end into a standard 120 VAC wall socket. Adaptor

must be plugged in to operate. The iHC5 does not operate on batteries.

Setting the Clock

a) Press and hold the Time Zone Button  until the display flashes.

b) Press the  Up or Down  Button to select your time zone. The clock will display the current time in your time

zone.

c) Press the Time Zone Button  again.

d) To adjust the time for Daylight Saving time, slide the  DST switch to +1 to advance the time 1 hour.

Slide to -1 to turn the clock back 1 hour.

To Set Clock Manually

a) Press and hold the Clock Adj Button  located on the back of the unit. The clock display will flash.
b) Press the  Up or Down  Button until the current time is displayed (a PM indicator appears when time is set to

PM; there is no AM indicator).

  c) Press the Clock Adj Button  to accept the time. The year display will flash.
  d) Press the  Up or Down  Button to adjust the year and press the Clock Adjust Button. The date display will flash.
  e) Press the  Up or Down  Button to adjust the date and press the Clock Adjust Button. Two beeps will indicate

clock setting is complete. Use the DST switch to adjust for Daylight Saving Time.

Using the Alarms

Setting the Alarms

a) Press and hold the Alarm 1 Button  until the alarm time flashes to wake to Bluetooth device or radio or the

Alarm 2 Button  to wake to buzzer at a separate alarm time.

b) Press the  Up or Down  Button to set the alarm time (a PM indicator appears when time is set to PM; there

is no AM indicator).

c) To wake to radio, press the Mode Button  to select your radio band, then press  Up or Down  Button to

tune to the desired station or press P1 to P4 for a preset station.

d) To wake to Bluetooth device, press the Play/Pause Button .

Note: Bluetooth device audio mode must be playing and Bluetooth device must be charging in order to wake to

Bluetooth device. Depending on the Bluetooth device you are using, iHC5 may not be able to make your Bluetooth

device play. If this occurs, the buzzer alarm will sound instead.

e) Press the Alarm 1 Button  again (or the Alarm 2 button if you are setting second alarm). Alarm is now armed,

indicated by the numbered alarm clock icon (Alarm 1 for Bluetooth or radio and Alarm 2 for buzzer).

Reviewing, Arming and Disarming Alarms (Turn Alarm Function On and Off)

a) Press and Alarm 1  (or Alarm 2 ) Button once. The iHC5 will show the current alarm time for alarm time review.

b) Press the Alarm On/Off Button  to arm or disarm the alarms. When an alarm is armed, the related alarm icon

appears in the display.