IBM Partner Pavilion Vitrual Switch Extension BMD00082 Manuel D’Utilisation
SmartConnect User’s Guide
60
Chapter 5: Command Reference
BMD00082, February 2009
Boot Options Menu
The Boot Options Menu (/boot) is used for upgrading switch software, selecting config-
uration blocks, and for resetting the switch when necessary.
uration blocks, and for resetting the switch when necessary.
To use the Boot Options Menu, you must be logged in as the administrator. The Boot
Options Menu provides options for:
Options Menu provides options for:
Selecting a software image to be used when the switch is next reset
Selecting a configuration block to be used when the switch is next reset
Downloading or uploading a new software image to the switch via FTP/TFTP
Maintenance Menu
The Maintenance Menu (/maint) allows you to generate a dump of the critical state
information, and to clear entries in the forwarding database and the ARP and routing
tables.
information, and to clear entries in the forwarding database and the ARP and routing
tables.
[Boot Options Menu]
image - Select software image to use on next boot
conf
- Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP
ptimg - Upload selected software image via FTP/TFTP
reset - Reset switch
cur - Display current boot options
[Maintenance Menu]
sys - System Maintenance Menu
fdb - Forwarding Database Manipulation Menu
debug - Debugging Menu
arp - ARP Cache Manipulation Menu
igmp - IGMP Multicast Group Menu
uudmp - Uuencode FLASH dump
ptdmp - Upload FLASH dump via FTP/TFTP
cldmp - Clear FLASH dump
tsdmp - Tech support dump
pttsdmp
- Upload tech support dump via FTP/TFTP