HP 288048 Manuel D’Utilisation

1.

Install 1/4 in. tube fitting into the cylinder (CYL) air 
port.

2.

Install plugs into the atomization (ATOM) air port 
and the fan (FAN) air port.

The following grounding instructions are minimum 
requirements for a system. Your system may include 
other equipment or objects that must be grounded. 
Check your local electrical code for detailed grounding 
instructions for your area and type of equipment. Your 
system must be connected to a true earth ground. 

Ground the pump by connecting a ground wire and 
clamp between the fluid supply and a true earth ground 
as instructed in your separate pump instruction manual.

Ground them according to the manufacturer recommen-
dations.

Use only electrically conductive hoses with a maximum 
of 100 ft (30.5 m) combined hose length to ensure 
grounding continuity. Check the electrical resistance of 
your air and fluid hoses at least once a week. If the total 
resistance to ground exceeds 25 megohms, replace the 
hose immediately.

Ground the spray gun by connecting it to a properly 
grounded fluid hose and pump.

Ground the fluid supply container according to local 
code.

Ground the object being sprayed according to local 
code.

Ground all solvent pails that are used with flushing 
according to local code. Use only metal pails, which are 
conductive. Do not place the pail on a non-conductive 
surface, such as paper or cardboard, which interrupts 
the grounding continuity.

CYL

ATOM

FAN

TI8225a

Use a meter that is capable of measuring resis-
tance at this level.