HP Performance Optimized Data Center (POD) 40cp Manuel D’Utilisation
Power management 35
Panels
The following panels are on the exterior of the HP POD.
Item Component
Description
1
Electrical busway enclosed
circuit breaker (on page
circuit breaker (on page
400A enclosed circuit breakers that powers the electrical
busways:
busways:
•
Two electrical busway panels are activated in the
standard HP POD.
•
Three electrical busway panels are activated in the high
density HP POD.
2
EPO panel (on page
Contains controls and status indicators for the EPO system
3
Fire alarm panel ("
Contains controls and status indicators for the fire alarm
system
4
ASSD panel (on page
Air sampling smoke detection system
5
EPO button
Cuts off all power to the POD and activates the EPO alarm
lamp.
lamp.
6
Security panel ("
Reserved for installing interface and power requirements for
any optional security devices installed.
7 EPMS
panel∗ ("
"
Electrical power monitoring system
("
" on page
Maintains the humidity inside the HP POD within a set range
to minimize static electricity.
to minimize static electricity.
9
Auxiliary Land power*
Provides auxiliary power for the BMS or convenience outlets.
120V owner-provided power.
120V owner-provided power.
10
BMS panel (on page
Building Management System
11
Fan control (FC) panel ("
Circuit breakers that control the fan units
12
120A electrical panel board providing auxiliary HP POD
electrical requirements
electrical requirements
13
Junction Box
Main input box for incoming electrical feeder cables
∗
Optional component