Hitachi SA200 Manuel D’Utilisation
4 Connecting and Installing Optional Devices
54
SA200
Exchanging the Peripheral Bay Modules
The SA200 right or “peripheral” bay is designed to house either a
floppy disk drive module or a CD-ROM module. Follow these
instructions to remove the peripheral module and insert another
module:
floppy disk drive module or a CD-ROM module. Follow these
instructions to remove the peripheral module and insert another
module:
1.
Place your system in suspend mode or turn your laptop
off using the Windows 95 Shutdown screen (see page
17).
off using the Windows 95 Shutdown screen (see page
17).
2.
Place the laptop on a flat surface with the underside
facing up.
facing up.
3.
Locate the peripheral bay release latch. Refer to Figure
20 on the next page.
20 on the next page.
4.
Slide the release latch toward the peripheral bay.
5.
Pull the module out of its bay.
6.
Insert the module of your choice. Make sure that the
release latch snaps back into place.
release latch snaps back into place.
7.
Resume from suspend mode by opening the LCD cover
or turn your system on by opening the LCD cover and
pressing the power button (see page 16).
or turn your system on by opening the LCD cover and
pressing the power button (see page 16).
Figure 20 Exchanging Peripheral Bay Modules
lonestar.boo : sa200.fm Page 54 Friday, March 6, 1998 10:53 AM