Hitachi SA200 Manuel D’Utilisation

Page de 138
4 Connecting and Installing Optional Devices
SA200
55
Removing and Replacing Your Hard Disk 
Drive
Your SA200’s modular architecture enables you to replace the 
hard disk drive. The drive unit is located in a special, removable 
compartment. Refer to your laptop dealer for details on obtaining 
another hard disk drive.
To remove or replace the hard disk drive, follow these steps:
1.
After you have saved your data, turn your laptop off.
2.
Place the SA200 on a flat surface.
3.
Locate the hard disk drive compartment release. See 
Figure 5 on page 10 and Figure 21 on page 56 for 
details. 
4.
Press the release tab and slide it outward.
5.
Using the pull loop at the end of the hard disk drive 
module, carefully pull out the hard disk drive from the 
compartment bay.
6.
With the label facing up, insert the new hard disk drive 
into the hard disk drive compartment until it clicks in 
place.
7.
Turn your laptop on.
8.
Press <F2> while the laptop is running through its 
Power On Self Test (POST). This accesses the BIOS 
Setup program.
9.
Use the Main menu to configure the new hard disk 
drive. See “Main Menu” on page 88 for more 
information.
Never insert or remove the hard disk drive 
compartment while your system is turned 
on! Otherwise, you will seriously damage 
your hard drive!
When your hard disk drive is removed from 
the laptop, always store it in a safe 
environment free from magnetic fields!
lonestar.boo : sa200.fm  Page 55  Friday, March 6, 1998  10:53 AM