Gerber Tools Saw 600 Manuel D’Utilisation

2 – 13

Turn the blade-length adjustment knob to retract the blade into the plunger.

Turn the plunger cap in the counter-clockwise direction to remove it from the plunger.

Remove the blade from inside the plunger cap.

Insert the new blade into the hole provided in the plunger cap.

With the blade inserted into the plunger cap, screw on the plunger from above.

■ Adjusting the Blade Length

If the blade is extended too far in relation to the thickness of the medium being cut, it will damage the cut-

ting mat. Be sure to adjust the blade length correctly.

Adjust the blade length by turning the blade-length adjustment knob. Turn the knob in direction “A” to

extend the blade, or in direction “B” to retract the blade. When the knob is turned by one scale unit, the

blade moves approximately 0.1 mm. One full turn of the knob moves the blade approximately 0.5 mm.

First align the blade tip with the tip of the cutter pen, and then extend the blade from that position to suit the

thickness of the media to be cut.

To prevent cutting your fingers, always handle the cutter blade with caution.

Ａ 

Ｂ