Gerber Tools Saw 600 Manuel D’Utilisation

4 – 25

This function corrects any deviation in the length of cut or the plotted line segments, which occurs depend-

ing on the medium being used. The adjustment value for the deviation is specified as a percentage of the

total distance. For example, a setting of 0.05% adjusts a distance of 2 m (2,000 mm) by +1 mm (2000 x

0.05% = 1 mm), to become 2,001 mm. Eight different cutter-pen condition-setting areas can be set on or

off separately, allowing different settings to be made in order to suit the medium used.

Press the 

 (PAUSE) key to switch to PAUSE mode.

Press the 

 (NEXT) or 

 (PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to display the distance adjustment menu. The num-

bers “1” to “8” indicate the cutter-pen condition-setting areas, and those that are

set on are indicated with the   symbol to the left.

Use the 

 or  

key to move the cursor to select the required condition-setting

area. Press the 

  or  

key to display or not display the   symbol, and then

press the 

 (ENTER) key to confirm. To cancel, press the 

 (NEXT) or 

(PREV.) key.

Press the 

 (PAUSE) key to cancel PAUSE mode.

Select the condition-setting area to be set to “ON” (refer to “Selecting Cutter-Pen-

Either press the 

 (ENTER) key or use the 

 key to move the cursor to the far

right, and then press the 

 key to display the following menu.