Gerber Tools Saw 600 Manuel D’Utilisation

4 – 34

This function sorts and cuts or plots the cutting/plotting data stored in the buffer memory to minimize the

amount of medium feed required. This is useful for data requiring a large number of movements on the

drawing with the pen raised. If the data received has been sorted using the application software, sorting

the data using the cutting plotter may require additional time. Turning this function off may speed up the

process.

Press the 

 (PAUSE) key to switch to PAUSE mode.

Press the 

 (NEXT) or 

 (PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to display the sorting setting menu.

Press the 

 or  

key to select “ON” or “OFF,” and then press the 

 (ENTER)

key to confirm. To cancel the selection, press the 

 (NEXT) or 

 (PREV.) key.

Press the 

 (PAUSE) key to cancel PAUSE mode.

• This setting is retained in the memory even when the

power is turned off.

• If data for which the cutting/plotting sequence has been

set using the application software is received, the cut-
ting/plotting sequence may be changed if this function is
set to “ON.” The function should be set to “OFF” in this
case.