Gerber Tools Saw 600 Manuel D’Utilisation

4 – 44

■ Self-Test-Pattern Printing

This function prints out a self-test pattern to check the accuracy of the cutting plotter.

Mount a plotting pen in the pen carriage, and set the conditions to suit the pen used (e.g., force, pen speed

Load an A3-size or larger medium.

Press the 

 (PAUSE) key to switch to PAUSE mode.

Press the 

 (NEXT) or 

 (PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to display the test-mode submenu, and then press the 

 (NEXT) or 

(PREV.) key until the following menu is displayed.

Press the 

 (ENTER) key to start printing the self-test pattern.

When the self-test pattern has been printed, turn the power off and then on again.

■ Dump Mode

This function checks whether data is sent correctly from the computer. If the output data does not match

the program after the dump list has been output, check the transfer conditions and connections.

Mount a plotting pen in the pen carriage, and set the conditions to suit the pen used (e.g., force, pen speed

The pen carriage begins moving as soon as this function is set. Keep your hands and
other objects away from the cutting plotter’s moving parts.

Load the medium so that it passes over the media sensor.