Emulex Computer Drive 355 Manuel D’Utilisation

I

N

S

PEED

™ SAN S

TORAGE

 S

WITCH

 M

ODEL

 355

C

HAPTER

 2 S

WITCH

 I

NSTALLATION

U

SER

’

S

 G

UIDE

7

The switch may be placed on a desktop or installed in a rack.

1.

Turn the switch upside down so the case bottom is facing up.

2.

Install a self-adhesive pad (included) on each corner of the switch bottom approximately 1 inch 
from each side (prevents surface damage).

3.

Turn the switch right-side up so the case bottom is facing down and place the switch on a stable 
table or platform.

For information on environmental requirements, see “Operating Conditions” on page 61.

Installing the switch in an equipment rack requires an optional rack mount kit (sold separately). The rack 
mount kit holds two switches. Contact a sales representative for more information or assistance in 
purchasing a kit.

•

Rack mount kit (Part Number 00651359-701)

•

4 thread forming screws, 6-32 x 1/4 100

°

 (included in the Rack Mount Kit)

•

No. 2 Phillips screwdriver

1.

Turn the switch(es) over (upside-down) on a flat surface.

2.

Turn the tray over (upside-down) and place it on top of the switch(es).

3.

Align the tray and the switch(es) using the four holes indicated in Figure 2-1. Make sure the back 
lip of the tray is aligned with the back side of the switch(es).

Note: Important safety, electromagnetic compatibility, and regulatory information is 

contained in the 

Safety & Regulatory Guide. The installation and use of this product 

must be in accordance with the information given in that guide.