EMC Network Cables P/N 300-002-803 Manuel D’Utilisation

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment

/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
install -o root -g root qla2200_conf.o
/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
install -o root -g root qla2300_conf.o
/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
depmod -a
make: Nothing to be done for
`/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/'.
depmod...
adding line: alias scsi_hostadapter2 qla2300_conf to /etc/modules.conf
adding line: alias scsi_hostadapter3 qla2300 to /etc/modules.conf
mkinitrd...
Installation of qla2300/qla2200 driver for 2.4.21-32.0.1.ELsmp
complete.
Ex: To load the qla2300 driver execute the following command:
# modprobe -v qla2300
Or Reboot the system for newly build ramdisk to load
qla2300 driver automatically for you
Installing the QLogic SNIA API library libqlsdm.so
in /usr/lib. API package is installed in the
/usr/src/qla2x00/ApiPkg path
Setting up QLogic HBA API library...
Please make sure the /usr/lib/libqlsdm.so file is not in use.
Done.

Example of the modified 

/etc/modules.conf

:

[root@l82bi114 extra]# more /etc/modules.conf
alias eth0 e1000
alias eth1 e100
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias usb-controller usb-uhci
options scsi_mod max_scsi_luns=255 scsi_allow_ghost_devices=1
post-remove qla2200 rmmod qla2200_conf
post-remove qla2300 rmmod qla2300_conf
alias scsi_hostadapter2 qla2300_conf
alias scsi_hostadapter3 qla2300

A new ramdisk is created automatically by the RPM installation.

4. Reboot the host.

This section describes how to successfully uninstall the QLogic 
v7.xx.xx/v8.xx.xx driver from a Linux host. 

The method used to uninstall the driver is dependent upon the 
installation package:

◆