CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

Page de 140
ADSL IP DSLAM 
 
 
                                                                 
 
110 
DSLAM. If you already know the IP address, you can skip this step. 
Example 
IPDSLAM# show sysip 
IP: 192.168.10.2 
Submask: 255.255.255.0 
Gateway: 192.168.10.1 
Note: Make sure that the system IP and your computer is in the same subnet. 
Step 3: Enter the command “tftputil <IP address> <get> <sf_user.cfg>” in dos 
interface. 
Example:  
 
c:\> tftputil 192.168.10.2 put sf_user.cfg 
 
When uploading, three LEDs, “MAINT” “ALARM” and “FAULT”, will blink. 
Unless you finish uploaded, do not shut down ADSL IP DSLAM. 
Step 4: Restart the system in the hyber terminal interface. The system will 
restart according to your “sf_user.cfg”. 
Example 
IPDSLAM# restart 
 
Yes or No <y/n>? 
 
System is restarting now.Wait…..