CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

 
 

                                                                 

 

15 

• Never install telephone wiring during a lightning storm. 

• Never install telephone jacks in wet location unless the jack is specially 

designed for wet location. 

• Never touch uninsulated telephone wires or terminals unless the telephone 

line has been disconnected at the network interface. 

• Use caution when installing or modifying telephone lines (other than a 

cordless telephone) during an electrical storm. There is a remote risk of electric 
shock from lightning. 

• Do not use a telephone or other equipment connected to telephone lines to 

report a gas leak in the vicinity of the leak. 

  The following figure shows the rear panel connection of ADSL IP DSLAM: 

 

Figure 2-1    ADSL IP DSLAM Rear Panel Connection 

Step 1: Ground the ADSL IP DSLAM by connecting a grounded wire 

Step 2: Connect the ADSL line connector, a 50-pin centronic connector, of 

ADSL IP DSLAM to CPE by using telco cable. Each line connector supports 8 
ports of ADSL for Data path from MDF(Main Distribution Frame). 

Step 3: Connect the phone connector, a 50-pin centronic connector, of ADSL 

IP DSLAM to Exchange/PBX by using telco cable. phone connector is an 
optional module supporting Voice path to Exchange/PBX; it must be along with 
Line Connector. 

Step 4: Connect the power adapter and plug it into an outlet.