CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

 
 

                                                                 

 

17 

This section will tell you how to connect and manage your ADSL IP DSLAM 

through EmWeb, CLI and EMS. 

 The embedded Web Interface (EmWeb), comprised of HTML files, is more 

user- friendly than CLI for your configuring ADSL IP DSLAM. The HTML files 
embedded in ADSL IP DSLAM are dynamically linked to the system’s 
functional command sets. You can access the EmWeb from any Web Browser. 

 Following the following procedure to connect the embedded Web management 

interface: 

1. 

Establish a connection to the internet 

2. 

Open the Web browser 

3. 

Enter the IP address of the ADSL IP DSLAM (Default IP: 

192.168.100.111) 

4. 

Log in as usual. (User account: Admin; Password: Admin) 

 To access any menu item on EmWeb, simply click on the item you want. The 

corresponding work screen will then appear on the right side frame. By 
pressing the Apply button will allow you to achieve your configuration, 
whereas pressing Cancel button will clear all your changes without applying 
them. In some menus, there will be Modify item will allow you to modify the 
existing configuration. 

 The Command Line Interface is the most primary character based 

configuration interface. Some of configurations not provided in EmWeb can be 
configured through CLI. You can access CLI from the terminal emulation 
software. 

The procedure of connecting to the CLI is as follows: 

1.    Start up the terminal emulation software on the management station. 

If necessary, reconfigure the terminal-emulation software to match the