Furuno SC-60 Manuel D’Utilisation

2. INSTALLATION 

 
 

4.  Loosen four screws on the angular rate sensor mounting base, and then 

fasten the bulkhead mounting plate to the angular rate sensor mounting 
base. 

BEACON

20P8171

HEAD1

HEAD2

HEAD3

Bulkhead Mounting Plate

Angular Rate Sensor

Angular
Rate
Sensor
Mounting
Base

Top Fixing
Hole (x2)

5.  Close the top cover of the processor unit. 
6.  Partially screw in two tapping screws for the top fixing holes of the processor 

unit in the mounting location. Hang the processor unit on the tapping screws, 
using the top fixing holes. Screw in two tapping screws for the bottom fixing 
holes, and then tighten the top fixing holes.