Ciprico Rimfire 3880 Manuel D’Utilisation
21020285 D
User’s Guide
Chapter 3 Hardware Installation
Page 3 - 12
Step 4: Apply power and observe LEDs
Step 4: Apply
power and
observe LEDs
power and
observe LEDs
After you have inserted the board into the VMEbus slot, apply power to the
system.
system.
There are two LEDs on the faceplate of the RF3880: one is green and the other
is amber.
is amber.
Meaning of
LED’s
The LED’s are used in the following manner:
•
The green LED indicates BUSY status when the board is processing
commands.
commands.
•
The amber LED indicates an ERROR status.
Figure 13 Location of LEDs
Power-up
Sequence
At a normal power-up you should observe the following:
1.
Both LEDs will briefly light, then the green will go out.
2.
The amber LED will stay lit for less than 5 seconds, while self-test is
running.
running.
3.
The amber LED will go out, indicating self-test has passed.