Audiovox Clock Radio CR8030IE5 Fascicule

•  The unit should be in STANDBY mode to set alarm.
•  The alarm can be set to activate twice a day by setting two different alarm times in ALARM1 and ALARM2.
•  The unit can be set to “

BUZZER”, “Radio” or “iPod” alarm.

1.  Press the 

1 (Alarm 1) button, the “ ” icon blinks on the display.

2.  Press the 

1 (Alarm 1) button once again, then the “ ” icon, hour &

minute digits blink on the display.

3.  Press the 

HOUR button to adjust the hours.

4.  Press the 

MIN button to adjust the minutes.

5.  Press the 

FUNCTION button to select  “BUZZER”, “TUNER”, “iPod”.

Note: The shown “TUNER” icon represents Radio (FM/AM) mode.
6.  Press the

1 (Alarm 1) button again to confirm.

7.  The alarm 1 indicator will light up.
Notes: 
•  For the “

Radio” Alarm, you should tune into your desired station in FM or AM band before setting alarms, and it will

turn on to the last station you tuned in.

•  For “

iPod” Alarm, insert your iPod into the connector. If no iPod is inserted, it will alarm to the buzzer instead.

The clock radio will wake up to “

BUZZER”, “Radio”, “iPod”, when alarm timer reaches the preset time and then turns

off automatically after 60 minutes.
Note: After the unit wakes up to “Radio” or “iPod”, you can adjust the volume control to obtain the desired volume.

Setting the alarm for alarm 2 is the same as setting alarm 1 (Use the Alarm 2 button instead of the Alarm 1 button).
Note: If the Alarm 1 & Alarm 2 are set to the same time, the unit will alarm once only.

1.  Snooze (If you want to snooze a few more minutes)
  Pressing the 

SNOOZE button will deactivate the sound for 9 minutes. You can repeat this function as many times as

you like within 60 minutes from the preset alarm time.

2.  To stop alarm sound
  Press the 

 (Standby/On) button to stop alarm sound, and it will resume after 24 hours.

After setting alarms, press and hold the

1 (Alarm 1) or 2 (Alarm 2) buttons for 2 seconds until the alarm1 or alarm2

indicator disappears.

Set the alarm time again.

1.  Press the 

 (Standby/On) button to turn on the unit.

2.  Press the 

FUNCTION button repeatedly until the “iPod” indicator appears on the display.

3.  Then the iPod will start playing automatically.
Notes:
•  The iPod will be charged automatically (until fully charged) whilst it is docked in the cradle (Except when you are

listening to the radio.).

•  To prevent possible interference to the AM signal, please turn off the iPod while the radio is playing.

•  iPod nano (1st generation) 1GB, 2GB, 4GB
•  iPod nano (2nd generation) 2GB, 4GB, 8GB
•  iPod nano 3rd generation (video) 4GB, 8GB
•  iPod nano 4rd generation (video) 8GB, 16GB

•  iPod 5th generation (video) 30GB, 60GB, 80GB
•  iPod classic 80GB, 120GB, 160GB
•  iPod touch (1st generation) 8GB, 16GB, 32GB
•  iPod touch (2nd generation) 8GB, 16GB, 32GB

Remove the Dock Adapter by gripping the inside with
your thumb, then lifting out the adapter using the friction 
between your  thumb and the adapter.

1.  Ensure  the  appropriate  iPod  Docking  Adapter  is

installed.

2.  Insert your iPod into the connector in the dock.

•  Be sure to turn off the unit, disconnect the power adapter and remove all external connections before cleaning the

unit.

•  Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in

a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.

•  Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.

The sleep timer turns the unit off automatically at a pre-selected time.
1.  While the unit is on, press the 

 (Sleep) button and the display shows “90”.

2

.  Press the   (Sleep) button repeatedly to select the desired sleep time (in minutes) as listed below:

Note: “OFF” means the sleep mode is disabled.
3.  After setting a desired sleep time, the “

” icon will be shown in the display.

4.  The unit will automatically turn off once it reaches the sleep time.
To clear the preset sleep time, press the 

 (Sleep) button repeatedly until “OFF” appears.

Clock
Clock does not show the correct time.

•  There has been an electrical power interruption. Reset the clock.

Alarm  does  not  come  on  at  the  preset
time.

•  Is the current time correctly set on the time display?
•  Is the alarm time correctly set?

RADIO
Poor FM reception

•  Electrical devices in your home can cause poor reception. Move the unit

away from them (especially those with motors and transformers).

Poor AM reception

•  Rotate the unit horizontally.

iPod
iPod does not dock properly or does not 
install properly.

•  Remove your iPod from the dock and check for obstruction on the

connectors in the dock and on your iPod. Make sure you are using the
appropriate adapter for your model of iPod.

iPod  does  not  respond  to  the  speaker 
system.

•  Make sure that your iPod is working properly before docking into the unit.

Please refer to your iPod manual for details.

(not included)

3.  Insert your 

iPod Dock Adapter (not included) into the 

dock until it sits firmly in place.

1.  Before connecting your iPod, we recommend you install 

the appropriate

 iPod Dock Adapter (supplied with the 

iPod or sold separately) in the dock of the unit.     

2.  Lift up the iPod Dock Door to approximately 90

o

.

Printed in China 811-803091W071

VENTURER ElECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the 
original consumer purchaser and is limited to non-commercial use of the product.

Ninety (90) Day Parts & labor Warranty
VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship 
for a period of ninety (90) days from the date of their original retail purchase. If the unit fails to conform to this warranty,
we will service the product using new or refurbished parts and products, at 

VENTURER’s sole discretion.

During a period of ninety (90) days from the effective warranty date, VENTURER will provide, when needed, service labor
to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must 
first call our 

Customer Support Center at 1800-252-6123, during the hours listed in the box below. The determination 

of service will be made by 

VENTURER Customer Support. PlEASE DO NOT RETURN yOUR UNIT TO VENTURER 

WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used
for repairs by VENTURER at its designated Service Center for ninety (90) days from the effective warranty date. Such
replacement parts or products are warranted for an additional ninety (90) days from the date of repair or replacement.
The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted 
to make the necessary repairs. The customer is responsible for all transportation charges to the service facility.

Packaging and Shipping Instruction
When you send the product to the VENTURER service facility you must use the original carton box and packing material
or an equivalent as designated by 

VENTURER.

your Responsibility
(1)  You must retain the original sale receipt to provide proof of purchase.
(2)  These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.
(3)  Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have 

been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, 
or  use  in  violation  of  instructions  provided  with  the  product,  or  to  product  which  has  been  altered  or  modified 
without authorization of

VENTURER, or to products or parts thereof which have had the serial number removed or 

changed.

In the event your product requires repair after the limited warranty period has expired, please contact our Customer 
Support Center at 

Hours: Monday-Thursday: 9-7, Friday: 9-5, Saturday: 9-12 EST
Important: You are responsible for any transportation, shipping or insurance relative to the return of the product to our

Product Returns Center.

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose,
are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by 
state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements 
and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall 
VENTURER be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties
in any manner whatsoever. The time within action must be commenced to enforce any obligation of 

VENTURER arising 

under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90)
days from the date of purchase. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some 
states do not allow limitations on how long an implied warranty lasts, when an action may be brought, or the exclusion or 
limitation of incidental or consequential damages, so the above provisions may not apply to you.

For more information on other products and services, please visit our web site at: 
www.1800customersupport.com/audiovox

Important: Also keep your “Bill of Sale” as proof of purchase.

Model no. ............................................................... Product name ...............................................................................
Type of set ....................................................................................................................................................................
Serial no. ................................................................ Invoice no. ....................................................................................
Date purchased......................................................  Dealer name .................................................................................

FOR SERVICE AND REPAIR, PLEASE VISIT

Alarm 2
Indicator

Alarm 1

Indicator

Hour Digits Minute Digits

AC: 120V ~ 60Hz AC SUPPLY
BACKUP BATTERIES FOR CLOCK: 2 x “AA SIZE”
RADIO FREQUENCY:  AM 520 ~ 1710KHz

FM 87.5 ~ 108.0MHz

                                

1.  Press the 

 (Standby/On) button to turn the unit on.

2.  Press the 

 button to AM or FM band.

3.  Press the 

 or 

 button to tune in to a station.

•  Adjust the

VOlUME control to obtain the desired volume.

•  Press and hold the

 or 

 button until the tuner starts searching for a station, then 

release. After finding a clear station, the search stops automatically.

Note: The search may not stop at a station with a very weak signal.

The unit can store a total of 20 stations in memory (10 X FM, 10 X AM). Presetting allows you to tune in to a station
directly.
1.  Tune in to a desired station (see previous section).
2.  Press the 

MEMORy button. The preset number will blink on the display.

3.  Press the 

PRESET button repeatedly to select the preset number you desire.

4.  Press the 

MEMORy button again to store it in memory.

5.  Repeat steps 1-4 to store other stations.

Press the 

PRESET button repeatedly to select a preset station that you would like to enjoy. 

FM: Place the unit in the position that sounds best.
Note: When the reception is good, the “STEREO” indicator will appear on the display.
AM: Reposition the unit to get better AM reception.
Note: It’s possible you may cause interference to AM signal reception by standing very close to the product.

•  Press the

 button.

•  To resume playback, press the

 button again.

•  Press either the

 or 

 button according to the desired direction.

•  Press the

 button to skip to the beginning of the current track or previous track. Press the 

 button to skip to 

the beginning of the next track.

•  Keep either the

 or 

 button pressed during playback, according to the desired direction, and release at the 

desired point.

Note: Please refer to the owner’s manual that was supplied with your iPod for more details.

CR8030iE5 English IB.indd 2

8/18/2009 12:33:38 PM