ADT Security Services ADT-LCD40 Manuel D’Utilisation

Operation

Display Patterns

13

Document 50520    Rev D   7/25/00   P/N 50520:D

The ADT-LCD40 Series Annunciators directly display (mimic) the 
information on the Unimode 200 main circuit board LCD display with 
the following exceptions:

• Upon Power-up, the ADT-LCD40 Series may display the 

following message until a valid message is received from the 
Unimode 200 

• If an ADT-LCD40 Series Annunciator fails to receive communi-

cations from the panel for a period of over 30 seconds, it will 
activate its local sounder (if so programmed) and display the 
following message: 

• When placing the host Unimode 200 into some aspects of the 

Programming Mode, the annunciator will display the following 
message: 

The message shown above will appear at the Level One passcode for 
(1) Autoprogram, (2) Point Edit, (3) System Edit, (4) Passcode Entry 
and (5) Load.  The same message will also appear at the Level Two 
passcode for (1) Disable, (2) Clear History and (4) Time.

SYSTEM POWER UP
WAITING FOR THE FACP

COMMUNICATIONS FAIL

PROGRAMMING THE
UNIMODE-200 PANEL