ADIC Time Clock 6-00028-01 Rev A Manuel D’Utilisation
Managing the AMASS File System
6-00028-01 Rev A
Utility Reference
4-17
Prerequisites
Before running this script, the following conditions must be
met:
met:
•
AMASS must not be running when you run
install_tests
.
•
The drives must be empty but Active.
•
At least one tape or optical platter must be in a home
storage slot; this volume should be the Backup Volume. Just
make sure this volume is not a cleaning cartridge because a
cleaning volume does not return a “tape loaded status” to
AMASS and thus
storage slot; this volume should be the Backup Volume. Just
make sure this volume is not a cleaning cartridge because a
cleaning volume does not return a “tape loaded status” to
AMASS and thus
install_tests
will fail.
•
If more than one client (besides AMASS) is sharing a drive
through DAS for an AML, the drive must be allocated to
AMASS for
through DAS for an AML, the drive must be allocated to
AMASS for
install_tests
to successfully complete.
For instructions on configuring AMASS as a DAS client,
refer to “Using DAS as a Library Interface” in Accessing
Storage Devices.
refer to “Using DAS as a Library Interface” in Accessing
Storage Devices.
Option
Description
-u
show usage
-b
do not enable AMASS at boot
See AMASS at Boot description
See AMASS at Boot description
-d
bypass drive load tests
WARNING:
this should only be used if
no drive changes have
been made!
no drive changes have
been made!
-n
do not start AMASS upon completion