ACCO Brands Electric Heater H212 Manuel D’Utilisation

Page de 6

Special notice
Thank you, for your recent purchase of a GBC Pouch Laminator. Your 
new laminator may emit a slight odour during the initial stage of 
operation. It is normal and will diminish after several hours of operation.
Service
•  Do not attempt to service or repair the pouch laminator yourself. 
Unplug the unit and contact an authorised ACCO Brands Europe 
service representative for any required repairs.
Electrical safeguards
•  The unit must be connected to a supply voltage corresponding to the 
electrical rating shown on the unit. 
•  Unplug the unit before moving it, or when it is not in use for an 
extended period of time. 
•  Do not operate with a damaged supply cord or plug. Do not alter the 
attachment plug. The plug is configured for the appropriate electrical 
supply.
•  Do not overload electrical outlets beyond their capacity; fire or 
electrical shock could result. 
• The unit is intended for indoor use only. 
•  Never push objects through the cabinet slots. Do not spill liquid of any 
kind on this product.
• Close supervision is required when this product is used near children.
General safeguards
• Use the unit only for its intended purposes of laminating documents.
•  Do not place anything in the throat opening of the laminator other than 
pouches/documents. 
•  Place unit on a secure, stable work area to prevent the unit from 
falling and possibly causing personal injury and damage to the unit. 
• Follow all warnings and instructions marked on the unit.
•  The socket outlet shall be installed near the equipment and shall be 
easily accessible. 
•  Do not attempt single side lamination, this will destroy the laminator.
•  Do not block the vent slots, this will cause the laminator to overheat.
The following ISO and IEC symbols appear on this product, and their 
meanings are as follows:
Heat
Release
Cold
On / Off
THIS WARNING IS FOUND ON THE PRODUCT. 
Electrical shock hazard. 
Do not open. No user 
servicable parts inside. 
Refer servicing to qualified 
service personnel.
WARNING
m
c
This safety message means that you could be seriously hurt or killed if 
you open the product and expose yourself to hazardous voltage.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY 
MESSAGE IN THIS INSTRUCTION MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL 
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, 
AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY 
DAMAGE.
m
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT 
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON 
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE 
MESSAGES CAREFULLY.
m
WARNING: FOR YOUR PROTECTION DO NOT CONNECT 
THE POUCH LAMINATOR TO ELECTRICAL POWER UNTIL 
YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP 
THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR 
FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE 
FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE 
OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT. 
m
Important safeguards
m
Caution: Unplug this product before cleaning.
•  Wipe exterior only with a damp cloth. Do not use detergents 
or solvents.
•  Do not use aerosol dusters or cleaners.
•  Do not spray anything into the machine.
m
Cleaning
Specifications
GBC HeatSeal H212
230V / 50hZ / 2Amps / 500W
400 x 173 x 117.5mm
3.1kg
241mm
2 x 125 mic (Total 250)
0.8mm
5 minutes
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Maximum Pouch Thickness
Maximum Thru-put Thickness
Warm-Up Time (2 x 75 mic)
GBC HeatSeal H312
230V / 50Hz / 2Amps / 500W
476x173x117mm 
3.9kg
318mm
2 x 125 mic (Total 250)
0.8mm
5 minutes