Digi Tech DigiTech Telephone C0408 Manuel D’Utilisation

 Of System Features

local calls and will only take effect when the system is
placed in the night transfer (of ringing) mode.
Therefore, even though toll calls can be made 

 this

station during daytime operation, no toll calls can be
made from it when the attendant programs the system

for nighttime operation using the night transfer of

ringing feature.

Toll restriction class of service programming is used to

program the night mode toll restriction tables and to
assign them to the stations.

Intercom calls can be tone signalled or voice signalled
as desired.

Programming determines the signalling method

employed as the primary method when an intercom

call is made. The 

 method is available through

user action at the station. Intercom call progress is
marked by special tone signals. 

 refer to the

paragraph titled: 

system class of service programming determines
which type of intercom signalling is first option
signalling for the system.

A fixed button is provided that gives quick, easy

transferring and conferencing.

A transferred call that is unanswered after a
pre-programmed length of time will return to the
station that transferred ft. The system will return the
call to both attendant stations when the tandem
attendant feature is enabled. When LCD
speakerphones are employed, the display will show

the station number or name as well as the line number
that is being recalled. The system class of service

programming determines the recall time for an
unanswered call transfer. Refer to the discussion
titled:  Tandem 

This feature allows station users to block voice

announced intercom signalling by pressing a

programmable button programmed for that purpose.
The programmable button used to block voice

signalling is enabled by station class of service

programming.

When using ExecuMail, a busy station may desire to
be alerted if ExecuMail is attempting to transfer a call

to that station. This feature allows a station to be

programmed for this option. With this option, when

ExecuMail tries to transfer a call to a station that is

busy on a call (outside or intercom call) and the station

has an available intercom line (stations can be

programmed to have a second intercom), the intercom
will ring subdued. The call can be picked up by
pressing the button of the ringing intercom line. In
general, attendants will probably desire this feature so
they can handle multiple calls, while other station users

may prefer to have a message taken when they are

already busy on a call.

Zone paging allows groups of stations to receive
announcements through the station speakers. The
programming can enable zone paging in up to four
different zones. Zone paging can also be received at

the paging 

 where it can be connected to the input

of an external paging amplifier. The 

 of each

station to originate and/or receive a page and the
arrangement of the paging into different zones are

 by station class of service programming.

Zone paging through the paging 

 is enabled by

system class of 

 programming. Also refer to the

discussion titled: