Emerson E2 Manuel D’Utilisation

To start the setup on the I/O Network, access the Net-

work Setup menu:

1.

Press 



 to open the Main Menu

2.

Press 

 

(System Configuration)

3.

Press 



 (Network Setup)

The Network Setup menu displays four options:

• Network Summary

• Connected I/O Boards & Controllers

• Router Setup

• Controller Associations

For the total (E2) devices online or offline, status, 

setup screens, changing board or controller names, config-
uring and commissioning devices, deleting a device, and 
viewing detailed status screens of controllers, select Net-
work Summary.

For the number of I/O Network devices (16AIs,8ROs, 

etc.) associated with each controller online and offline, 
select Connected I/O Boards & Controllers.

To set up a router, select Router Setup. For more 

information on routers and repeaters, refer to the Router 
and Repeater Installation Guide (P/N 026-1605).

For CC-100 circuit associations, select Controller 

Associations.

Specify the number of boards from the Connected I/O 

screen: 

1.

Press 



 to open the Main Menu

2.

Press 

 

(System Configuration)

3.

Press 



 (Network Setup)

4.

Press 



 (Connected I/O Boards & Controllers)

16AI Boards   Enter the number of 16AI analog 

input boards on this E2’s I/O Network.

8RO Boards   Enter the number of 8RO relay output 

boards on this E2’s I/O Network.

8DO Boards   Enter the number of 8DO digital out-

put boards on this E2’s I/O Network.

4AO Boards   Enter the number of 4AO analog out-

put boards on this E2’s I/O Network.

IRLDS Controllers   Enter the number of leak detec-

tor units on this E2’s I/O Network.

(Options will vary depending on the type of controller 

used.)

You can check all boards that are on either the Echelon 

Network (E2 controllers) or the I/O Network from the Net-