BMW III Manuel Du Propriétaire

a

PPendix

Connect the enclosed AC power cable to the 

power connector on the back of the Navigator 

III. Connect the end to an available electrical 

outlet. 

Use the USB cable provided to connect the 

Navigator III to your computer. Also use the 

USB cable when updating the Navigator III 

software or loading additional maps. 

1.  Plug the small end of the USB cable into 

the connector located on the back of your 

Navigator III 

2.. Connect.the.larger.end.of.the.USB.

cable to an available USB port on your 

computer. 

1.  Load the USB drivers using the enclosed 

..

2.  Connect the AC cable to the power 

connector on the back of the Navigator III. 

Turn on the Navigator III 

3.  Connect the USB cable to your Navigator 

III.and.your computer. 

4.. Go.to

.www.garmin.com/products/

..Select.

..

5.. Click.

.next.to.the.unit.software..

6.  Read and agree to the terms. Click 

..

7.. Select.

(or 

). Your software is 

updated.

You can also use WebUpdater to update your 

Navigator III software. Go to 

 to learn about 

WebUpdater.
Check 

to see if an update for your map software is 

available. 

To find out the version of the maps that are 

loaded on your Navigator III, open the Main 

menu. Touch 

 > 

 > 

. 

To load maps to your Navigator III, see the 

MapSource Help file. 

Your Navigator III accepts custom points of 

interest (POI) databases, including Garmin 

TourGuide POIs available from various 

companies on the Internet. Some custom POI 

databases contain alert information for points, 

such as safety cameras and school zones. 

Your Navigator III can notify you when you 

approach one of these points.
After downloading your POI database, use the 

Garmin POI Loader to install the POIs into 

your unit. The POI Loader is available at

 www 

.garmin.com/products/poiloader.

 Select 

. Refer to the POI 

Loader Help file for more information; press F1 

to open the Help file.