Bosch AG Computer Accessories R911310079 Manuel D’Utilisation

DOK-SUPPL*-VSB*40.1***-PR02-EN-P

9.  Loosen the screws, with which the hard disk is mounted, with a

Philips screwdriver by inserting it through the holes in the mounting
frame.

83_LS_Schrauber.JPG

Fig. 8-11:

Loosen the fastening screws of the hard disk

10.  Remove the old and insert the new hard disk.
11. Plug-in the cables at the hard disk and, if necessary, at the CD/DVD

drive. Observe that you don't bend the connection pins.

Check the cable connections leading to the hard disk for
tightness.

12. After having plugged-in the cables, put the VSB 40.1 in the mounting

plate (mounting frame). Observe not to squeeze any cables.

13. Connect the mounting plate (mounting frame) and VSB 40.1 with the

four screws.

14. The new hard disk parameters are automatically recognized by the

system. If the operating system does not boot automatically after
switching on the VPB, interrupt the power supply for at least 10
seconds and restart.

15. After a regular booting of the PC, the user data as well as the

operating system settings for the normal operating mode are to be
restored.