Bosch AG Computer Accessories R911310079 Manuel D’Utilisation
VSB 40.1
Maintenance and Installation
8-9
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
Exchanging Hard Disk with Damper
In case of VSB devices containing hard disks with damper, the hard disk
is located below the device, refer to Fig. 8-12.
is located below the device, refer to Fig. 8-12.
Position_der_schwingungsgedaempften_Festplatte.EPS
Fig. 8-12:
Location of the hard disk with damper
In order to exchange the hard disk, remove the fastening screw of the
hard disk installation frame on the bottom side of the VSB 40.1 (refer to
Fig. 8-13). Lift the hard disk frame and after releasing the retaining spring
unplug the ribbon cable, with which the hard disk is connected to the main
board. Now, the installation frame with hard disk can be removed and can
be exchanged as whole unit.
hard disk installation frame on the bottom side of the VSB 40.1 (refer to
Fig. 8-13). Lift the hard disk frame and after releasing the retaining spring
unplug the ribbon cable, with which the hard disk is connected to the main
board. Now, the installation frame with hard disk can be removed and can
be exchanged as whole unit.
Installation frame for hard disk
Fastening screw
Festplattentausch.FH11
Fig. 8-13: Position of the hard disk's installation frame and the fastening screw