VTech IP Phone DS6472-6 Manuel D’Utilisation
103
Appendix
Handset battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you
can expect the following performance:
operation
operating time
While in handset use (talking*)
Up to seven hours
While in speakerphone mode (talking*) Up to five hours
While not in use (standby**)
While not in use (standby**)
Up to seven days
*Operating times vary depending on your actual use and the age of the battery.
**Handset is not charging or in use.
The battery needs charging when:
A new battery is installed in the handset.
The handset beeps every minute while on a call.
The handset beeps and
The handset beeps every minute while on a call.
The handset beeps and
Low battery displays on the handset.
Place in charger displays on the handset.
A battery is properly installed but the screen is blank.
A battery is properly installed but the screen is blank.
CAUTIoN:
To reduce the risk of fire or injury, read and follow these instructions:
To reduce the risk of fire or injury, read and follow these instructions:
Use only the battery(ies) provided or equivalent. To order a replacement, visit our
website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
Do not dispose of the battery(ies) in a fire. Check with local waste management
Do not dispose of the battery(ies) in a fire. Check with local waste management
codes for special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
Exercise care in handling batteries in order not to create a short circuit with
Exercise care in handling batteries in order not to create a short circuit with
conductive materials.
Charge the battery(ies) provided with or identified for use with this product only in
Charge the battery(ies) provided with or identified for use with this product only in
accordance with the instructions and limitations specified in this manual.
Observe proper polarity orientation between the battery and metallic contacts.
To prevent fire or shock hazard, do not expose this product to water or any type
Observe proper polarity orientation between the battery and metallic contacts.
To prevent fire or shock hazard, do not expose this product to water or any type
of moisture.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•